Product Writing – A Report (Useful for student feedback!)

Who is this post for?

  • Students looking at writing skills – especially writing a report for FCE / CAE
  • Teachers looking at lesson structures
  • Teachers / Managers looking at effective ways to get honest feedback


The thing I love the most about a product writing lesson is that it’s surprisingly multi-level. Because you structure the class around a model text and language from that model, (as long as you grade the model and the target language accurately) you can use this kind of lesson with classes from A1-C2. Students have the support they need because they can see a model, and when they finally produce their own work, they can rely on this model to different degrees depending on confidence and competence. Obviously, student output will vary wildly, but once you are at the written output stage of a product writing class, the pressure is off both the teacher and the student in that the traditional “teaching” part of the class is over, as is the stage at which students openly exhibit what they do and don’t know in front of the whole class.

Sample lesson / structure

Have a look at the material here (from New English File Advanced) Writing a Report (from New English File Advanced Pp. 80-81)

  1. Start students off with a discussion in small groups about the positives / negatives of their school, or things they would like to see in their perfect school. You could produce a form for them to make notes in.
  2. Get group feedback
  3. Students read the report on P.80 – ask some comprehension questions and get feedback on the structure / language used (How is it paragraphed? Is the language formal or informal?)
  4. Start looking at the controlled practice activities – P. 80 b, P. 81 c / d. Remember to get some of this language on the board – look sideways at the sentences (What comes after “advisable to” / “strongly recommend”?) – and go through meaning / form / pronunciation.
  5. Organisation stage – students look at how they will structure their report (ordering) – they can do this in a group
  6. Individual writing stage – the output stage. They’re trying to write their own report about the school, using some of the target language.

They can finish this for homework, and then you can either use some of their mistakes for another lesson, or provide feedback in a different way.


You could use this lesson with any level. I would even say that you wouldn’t need to adapt the model text for Intermediate / Upper-Intermediate students; grade the task, not the text. So, perhaps you would only focus on exercises c and d with an Int class (P.80 ex. b might be a bit tricky). For Elem / Pre-Int, you would need to simplify the text a bit, and perhaps your language focus would focus on something like “Ways to give opinions” (I believe / In my opinion / I think) or “Reporting using past simple”. You’d then need to prepare controlled practice activities around the model text, but this wouldn’t be too time-consuming, as a lot of the adaptation would be exactly that: adapting rather than rewriting.

Teachers / Managers

I watched a fairly inexperienced teacher do a great job with this product lesson from New English File the other week – they used P.80 and then c / d from P.81, missing out the brainstorm etc. stages after that, because they would be more applicable to a process writing task instead (see more on product /  process writing structures here ). The thing that makes this lesson interesting for students, teachers and managers, is that the output stage gives students a chance to reflect privately on what they believe the strengths / weaknesses of their school are. This is perhaps more revealing than focus groups, as students are often reluctant to voice their issues directly to a manager, or in front of other students. The timing of this class supported this theory; we had a focus group the week before and much of what was raised on the written reports from this lesson hadn’t been mentioned! I’ve since arranged for all classes to do this lesson at some point this term, so that we can get some really good feedback to work from.


Have a look at the material in this file. Here are a few things to consider if you’re preparing for Cambridge Exams.

  1. The structure is based on a series of titles
  2. The introduction clearly states the aim of the report
  3. The conclusion is very generalised
  4. There are a lot of examples of the passive being used, as well as language for generalising – eg. “It is generally thought…”
  5. Precision is an important part of the test. Why say “making classes smaller” when you could say “reducing class size”? The words do  / make / get are often used because a student doesn’t know the exact verb that a native would use. When you start to write one of these verbs, think: is there a better word I could use?

Writing a Report (from New English File Advanced Pp. 80-81)

As always, if you want to send your attempts to me, I’d be happy to receive them! 🙂



CAE Speaking – Structures (Also for FCE / CPE)

I’ve been doing a lot of CAE exam preparation classes recently, and I’ve noticed that a lot of people are making three similar mistakes. This short article will hopefully help you avoid them. NB: These tips also apply to FCE and CPE, although the tasks I have chosen are CAE tasks.

1) Don’t feel you have to say too much in Part 1

It’s quite normal to learn the idea that “speaking more is better” at schools. This is only partly true. If you are asked a very simple question (Where do you live?), then it is unnatural to say something like this:

“I live in Barcelona, a city in the North of Spain. It’s a large, cosmopolitan city with a population of several million, and has a remarkable landscape including beaches, mountains and a fascinating mixture of architectural forms”

Does that answer the question? Really, you’ve answered the question “Can you tell me a bit about your city?”

Don’t feel the need to go too far in this part – just answer the question: “I live in Barcelona, a major city in the North of Spain”. Save the other information for when you’re actually asked about it!

2) Don’t spend too much time “describing” in Part 2

So, with Part 2, you are given three pictures and have to choose two to talk about / answer questions on. Have a look at the example below:

Compare the educational settings

Describe how they are feeling



A good start here is to make your choice first: “I’m gonna go for the first and second pictures…”

Remember, from here you have about 55 seconds to do three things:

  • Describe
  • Compare
  • Interpret

Of these, the easiest is describing, so this is the part that should take the least time. Have a look at the example below:

“In the first picture, the two students are engaged in some kind of practical experiment – groupwork in a science class, whereas the setting in picture 2 is a lecture, so the students are passive – listening, rather than active – doing.

That’s enough for describing! Now for interpreting:

“Well, I reckon that the students in picture 1 are feeling pretty motivated – learning by doing is supposed to be really effective, and being able to control a process and see its results can be quite exciting. Also, as a small group, they can interact with each other and are probably quite good friends as they’ve chosen each other, so they’re probably happy and quite comfortable too, whereas, in the second picture, obviously they’re not talking. It’s possible that they understand everything that is being said perfectly, and they’re interested and listening intently, but it could also be the case that they are confused by some things, and not in an environment in which they can ask questions, which can be a bit daunting. It’s a less relaxed environment and requires a lot of concentration and discipline, so I guess they probably aren’t feeling as good as the two students in the first picture.”

Much longer! You could signal that you are going to finish by including a brief comment on your own feelings:

“Personally, I would be happier in the situation of picture 1, because…”

Good! Now, if you’re the “second speaker…”

Don’t waste time describing what you see – speaker 1 already did this. Immediately try and interpret, using the question you are given. Remember, you only have thirty seconds!

3) The “making a decision together” part of part 3 is more important than the general overview of the pictures!

Take a look at the example below:

How do these pictures show the role of computers nowadays?

Which picture best reflects the difference computers have made to our lives?



  • You don’t need to describe every picture – just give a general picture (example below)

Well, these pictures show that computers have basically infiltrated every part of our lives – from work at home, to children’s games, education and even retail systems. Everything is now computerised!

That’s enough! The other speaker can agree / disagree / add a bit to what you’ve said, but after that it’s time to focus on the second task, in which you have the opportunity to get the most marks for “interactive communication” (20% of your mark for this exam).

Make sure you take the opportunity to speak, but also give the other speaker a chance. Here are a few strategies.

  • I want to speak: Say “mmm…”, “yeah” or “but” while the other speaker is talking. They will hear this and naturally give you a chance at the end of their sentence – you don’t need to start talking (this is interruption and will lose you marks)
  • I want to give the other person a chance: Ask a question: “What do you reckon?” “Don’t you think?” “So, do you think that….?”  Asking questions is an important part of acknowledging the other person.
  • I made my decision really early, but I want to consider other pictures: Phrases like “But then again…”, “Although…” and “Mind you…” allow you to reconsider, or move on to other pictures – make sure you use the 3 minutes and don’t finish early.
  • We have finished: A question, or a statement: “So, we’ve decided that this picture is…” or “So, have we come to the conclusion that…?”

I hope these help. As always, feel free to contact me with any questions.

Good luck!



Speaking – Having a Discussion (Useful for FCE / CAE Students + Teachers)

In this post, I want to have a little look at how we interact with each other when we have discussions. Below, I have written a transcript of a conversation between three people at work.

Key: Red, Blue and Black are three speakers. Words in brackets () show when two people are speaking at the same time.

So, I thought that the meeting the other day was… (a bit rubbish)

…totally rubbish! Me too! And I was sure I was going to fall asleep y’know…

Yeah yeah me too! It was horrible! And I’d prepared some stuff to er… to talk about… and I didn’t… in the end I just couldn’t stay awake enough…

…so you’re saying you had things to say? I didn’t even have anything to…

…wait a minute, what was the meeting about?

Erm… about the way the new budget increase will… (be split)

…be split, and it was totally pointless erm… all the managers had already decided where…

Well hang on, I’m not sure about if…

They totally had and I…(thought it…)

Can I finish?

Yeah sorry, go on…

I’m not sure they’ve already decided that the money would go on resources for the training project…

No yeah, totally…

…and maybe saying something would actually help them get an idea…

Hahaha well maybe you’re right there, but anyway…


How many kinds of interruption can you see? Are they all polite or are some of them impolite?

Interruption Types:

  • Finishing sentences – anticipation – a bit rubbish / totally rubbish
  • Emphatic agreement – Yeah yeah me too / No yeah totally…
  • Disagreement – Well hang on
  • Clarification Request – So you’re saying… / Wait a minute

Can you see that when we agree, we often follow our agreement phrase with the word “And”?

Eg: Yeah no totally, and… / It was, wasn’t it? And… / Me too, and…

This makes sure that we keep our turn and can continue speaking. However, when we disagree we often use phrases that mean “Wait”

Eg: Hang on a sec / Wait a minute / Hold on / Well just a minute

We can also ask questions. This shows that we are paying attention and encourages the speaker. We often use the word “So” when we are going to ask a question. Phrases include:

So you’re saying that… / Wait a minute, so…

The other thing that we often do is finish each other’s sentences, anticipating what the other person is going to say. This shows that we know the person, and are comfortable in their company.

Next time you have a discussion, do you notice that other students are using this? Does your teacher use any of these phrases when you’re talking to him / her?


Teacher’s Notes:

It is useful to get a few of these phrases more automatised, so students could benefit from some drilling with a lot of these. Repetitive drilling, call and answer drills and backchained drills could all be effective.

As a practice, you could either use the Cambridge Exam speaking section where two students have to discuss a set of pictures, or you could play a game where students have to try to successfully interrupt each other in a topic-based discussion, with points gained for natural / polite interruptions. You could also use a game where one student is trying to tell a story and the other students are preventing them from being able to finish by using some of these phrases to slow them down.

You could use the model above as an analysis tool in the middle of a task-based lesson.